What is fiber optic cabling?
Fiber optics is a technology that transmits data as light pulses through a strand of glass or plastic, offer faster communications. It uses total internal reflection to send signals over long distances with minimal loss and no electromagnetic interference, making it superior to traditional copper for internet and data networking
Why would you need fiber optic cabling?
-
- Longer Distances: Fiber can span kilometers without signal degradation, while Cat6 is limited to 328 feet, with 10Gbps speeds failing beyond ~130 feet.
- Higher Bandwidth & Speed: Fiber supports much higher data throughput (10, 40, 100+ Gbps) compared to the standard 1Gbps-10Gbps of Cat6.
- Electromagnetic Immunity (EMI): Because fiber uses light rather than electricity, it is immune to interference from electrical equipment, power lines, and lightning, making it ideal for industrial settings or outdoor inter-building runs.
- Future-Proofing: Fiber optic infrastructure is more future-proof, most clients have fiber for 15-30 years. allowing speed upgrades by changing equipment at both ends rather than re-cabling.
As a result, many businesses are investing in fiber cabling installation to ensure future-proof connectivity.
-
- Smaller Size: Fiber cables are smaller and lighter, making them easier to install in packed, limited-space conduits.
Choosing the right type of fiber cabling installation can significantly impact your bandwidth capacity.
Higher traffic: fiber cabling is good for any place that has alot of people on network at once, high bandwidth demand business, data centers and any business that wants a smoother network experience.
Tyes of Fiber optic cabling?
OM1 Fiber cabling
OM1 fiber optic is a older cabling is a 62.5/125um multimode fiber with a orange jacket. speeds range from 100mb to 10gb for about 90ft. om1 is used for short range lans with a 200MHz-km bandwidth, making it unsuitable for modern high-speed data centers, despite being cost-effective for legacy fiber installations
For newer applications, fiber cabling installation is recommended for better performance and reliability.
upgrades
om3 fiber cabling or om4 fiber is a perfect upgrade. speeds range from 10gb to 40gb
OM3 Fiber Cabling
OM3 fiber is a laser optimized fiber cable, 50/125 micron multimode fiber normally aqua jacket. this fiber optic cable is designed for speeds of 10gb up to about 950 feet. It is widely used in data centers and local area networks, supporting 40Gbps and 100Gbps speeds over shorter distances (300 feet) with lower cost than single-mode fiber
OM4 fiber optic
OM4 fiber is a laser-optimized 50/125m multimode fiber designed for high-speed data centers, enterprise networks, and storage area networks. It supports 10 Gb up to 1700 feet, and 40/100 Gb/s up to 500 feet, featuring a 4700 MHz·km effective modal bandwidth (EMB) and typically an aqua or Erika violet jacket color.
OS2 single mode fiber optic
OS2 is a standard for single-mode fiber optic cable optimized for long-distance, high-speed data transmission (10G/40G/100G) using a core/cladding size. Featuring loose-tube construction, it offers low attenuation. Making os2 fiber cabling ideal for outdoor, long-haul, and outside plant (OSP) applications
Ready to take next step? Let’s get started